Shop

/Shop
  • Model GT02.  Consists of air motor, pressure plate, feeding pumps, glue gun, blender, proportional composition of inspection stations, and other devices. The two parts consist of base material supply system and curing agent supply system. Has adoption of synchronous linkage with adjustable booster system.  Adoption of static reciprocating tube mixer. Simple operation.  Parts that contact the fluid is made of high quality stainless steel. Runs off compressed air.  Dimensions are 43" x 37" x 71"

    Leasing Available

  • 55 Gallon Hot Melt Pumps (New)

    $39,975.00$48,500.00
    55 gallon hot melt pump is widely used for PUR, EVA, PIB hot melt sealant application.  Has face to face interface, intelligent operating system.  Glue capacity adopts three lights to indicate capacity available with an electronic alarm to warn of low capacity.  More specifications available on request.

    3.5 lbs per minute  Lease for $870

    6.6 lbs per minute  Lease for $1,056

  • System includes hot melt gunning pump, heated hose comes with gun and speed table.  Adjustable sealant pumping speed.  Preheat time: 30 - 60 min.  Adjustable temperature control for all for heat areas. Video available.  Aerodynamic pressure of rack is 2-4 mpa.  Hot melt capacity: 123 pounds.  Power supply: 220 Volts, 3 Phase, 60 Hz.

    Leasing available

  • Rotating table for sealing insulated glass units.  Supporting arms can be adjusted to glass size.  Large vacuum cup holds glass while sealing. Foot switch controls the lifting of glass.  Foot switch to control 0-90 degree rotating of glass.  Easy to operate and efficient to use.  Brand new machine!
  • Reduces production labor and improves efficiency.  Uses two part sealant, usually silicone.  Intelligent touch human-machine interface for simple operation and convenience.  Available in two sizes.  Maximum glass size 98" x 118" or 79" x 98" on smaller units. Glass thickness 3 mm to 12 mm.  Unit thickness 2″ or less. Working speed 16′-140′ per min.

    Lease for $1,885

  • Cold Press

    $14,400.00
    Cold Press.  Three pairs of solid rollers.  Processes width up to 60", available in 72" and 84" at additional cost.  Power: 220 Volt, 3 phase, 60 cycles.  Up to 1 9/16" thickness Glass feed speed 40"-200" per minute.  Overall dimensions 69" x 69" x 47".

    Lease for $280

  • 72″ press  ( other sizes available).  Five roll heated press.  Capable of manufacturing up to  72 x 120" units.  Variety of air spaces with one simple adjustment.  Clean and easy to operate.  Adjustable temperature control. Adjustable throughput speed. Pass through system.  Extremely low start up costs. Made for Ameracan Equipment.

    Lease for $ 396

  • Excellent for applying tape type spacers as well as metal spacers with PIB installed.  The vacuum holds the glass firmly in place while the spacer is applied.  Air float allows the glass to freely move about without scratching.  Table has seven built in squaring rams.  Frame is made of 2″ square steel tubing and has a PVC plate.  Available in two sizes and each unit includes one dispenser stand.

    Please call 855-669-9108 for leasing costs

  • Built in squaring rams: Five on the bottom and two on the side.  Comes with a spacer application stand.  Excellent for applying tape type spacers as well as metal spacers with PIB installed.  The vacuum holds the glass firmly in place while the spacer is applied.  The air float allows the glass to freely move about without scratching the glass.  The frame is made of 2″ square steel tubing and has a PVC plate. Available in two sizes. Each unit includes one dispenser stand.

    Call 855-669-9108 for leasing prices

  • Model: ZW-ll.  Control system manufactured by Siemens.  Sensor on the ruler automatically starts drive motor. Has manual and automatic system. Memory holds 2 job patterns.  Easy to operate.  Power: 220 Volts 60 Hz.  Dimensions: 150" x 47" x 75".
  • PLC automatic control, feeding positioning, bending and cutting are all completed at one time.  Automated feeding system, automated cutting system, automatic aluminum spacer bar corner.  Capable of making shapes like square, rectangle, circle, trapezoidal, arch, polygonal, etc. Everything is done on touch screen except start and stop.  Processing speed adjusts automatically based on the size. Easy to operate and program.  Power: 220 Volt 3 phase.  Minimum size: 11" X  11".  Maximum size: 80" X 80".  Spacer bar size: 1/4" to 1".
  • PLC Control system, time setting, automatic hole drilling.  Quick and easy to use.  Maximum size: 79" X 79"