Shop

/Shop
  • –Uses heated air to soften the profile to make it easy to bend -The air is heated by lights and the profile is heated in the air -Makes bending of profile easy and accurate for a variety of curved shapes -It includes the working table,the heating device and the shape forming clamps – arch radius 19.5″ to 71″ with different shape forming bands -Total power: 12 KW
  • In good condition when taken from service.  Model DC-12-P.  Serial Number  179979

  • Processes various profiles.  Accurate end cuts of mulling extrusions. Worktable can be adjusted vertically to make it suitable for different profiles.  Power requirements: 220 Volt 60 Hz. Motor rotation speed.  Minus 65 degrees to plus 65 degrees.

    Lease for only $ 190.00

  • Composed of  three-hole drill and copy-routing mill.  Processes various kind of holes, grooves and water slots.  Adjusting parts on top of machine for easy access.  Changeable copying plates for different holes and grooves. Power: 220 Volt 60 Hz.

    Lease for $ 195.00

  • Solid frame construction.  Automatically returns to original position for ease of operation. Feeding system adopts linear guide pair.  Size tolerance compensation is available for increased welding precision. Length locator is by means of a ball screw system for high accuracy.  Power:  220 Volt  3 phase 60 Hz. Welding height: 1"  to 5  7/8".  Welding width: up to 5 1/2".  Welding range: 15 3/4" X 15 3/4" X 71" X 118".

    Lease for $1,177.

  • Solid frame construction.  Feeding system adopts linear guide pair for high accuracy and smooth operation. Common profile fixtures along with the welder can meet various height profiles. Back plate are easy to change. Two clamping boards feed symmetrically resulting in parallel welding and increased weld strength.  High quality computer control system for precision welding and ease of operation.  Power: 220 Volt 60 Hz  3 phase.  Welding height: 1" to 6".  Welding width" 5.5".  Welding range 16″ X 16″ to 76″ X 118″

    Lease for $830

  • Model SHWA2.  This welder is designed for colored, co-extrusion and sprayed vinyl extrusions. The welding slag is immediately cut  away by cutters installed on the clamping  devices. Leaves only a hair crack of less than .002mm.  It can process a variety of shapes.  Has JDB solid oil less bearings and LM linear guide.  Comes with PLC Control system. Very accurate and efficient.  Power: 220 Volt  3 phase 60 Hz.  Welding length 15  3/4" to 142", with welding height of 3/4" to 4  3/4".

    Lease for $ 630

  • LM linear bearing.  Excellent for PVC windows and doors.  Can do shapes and mullions.  PLC Control System.  Very accurate and efficient.  Power: 220 Volt  60 Hz  3 Phase.  Welding Length:  15 3/4" to 142".  Welding height:  3/4"  to  4 3/4"

    Lease for only $350

  • Suitable to weld both Vinyl windows and doors.  CM oil-less Bearings. PLC control system. Very accurate and efficient.  Power: 220 V 60 Hz 3 Phase.  Welding length: 15 3/4" to 138".  Welding height: 3/4" to 4 3/4"

    Lease for only $295

  • Excellent for special shape windows and doors.  Welding action controlled by PLC.  30 degree’s to 180 degrees.  Power: 220 Volt 3 phase.  Welding Height: up to 6 1/4".  Welding width: 3/4" to 4 3/4".

    Lease for only $209

  • Automatic corner cleaner.  In good condition when taken from service.  Has a brand new PLC and has never had any cleaning programs loaded.

    Lease for $200.00

  • Complete window line including 4 pt and 2 pt welders, Corner cleaners, 15 punches, 2 routers and much more.  Exceptional deal for a complete set up.  This line includes 32 pieces of equipment and 15 racks!

    Leasing available at approximately $1,000