Shop

/Shop
  • 55 Gallon Hot Melt Pumps (New)

    $39,975.00$48,500.00
    55 gallon hot melt pump is widely used for PUR, EVA, PIB hot melt sealant application.  Has face to face interface, intelligent operating system.  Glue capacity adopts three lights to indicate capacity available with an electronic alarm to warn of low capacity.  More specifications available on request.

    3.5 lbs per minute  Lease for $870

    6.6 lbs per minute  Lease for $1,056

  • Built in squaring rams: Five on the bottom and two on the side.  Comes with a spacer application stand.  Excellent for applying tape type spacers as well as metal spacers with PIB installed.  The vacuum holds the glass firmly in place while the spacer is applied.  The air float allows the glass to freely move about without scratching the glass.  The frame is made of 2″ square steel tubing and has a PVC plate. Available in two sizes. Each unit includes one dispenser stand.

    Call 855-669-9108 for leasing prices

  • Uses heated air to soften the profile to make it easy to bend.  The air is heated by lights and the profile is heated in the air. Makes bending of profile easy and accurate for a variety of curved shapes.  It includes the working table,the heating device and the shape forming clamps.  Arch radius  19.5″ to 71″ with different shape forming bands.  Total power: 12 KW.

    Or lease for only $499

  • –Uses heated air to soften the profile to make it easy to bend -The air is heated by lights and the profile is heated in the air -Makes bending of profile easy and accurate for a variety of curved shapes -It includes the working table,the heating device and the shape forming clamps – arch radius 19.5″ to 71″ with different shape forming bands -Total power: 12 KW
  • Arch Window Machine for PVC Profile.  Designed to bend vinyl extrusions. Uses heating oil to soften PVC Profile.  Soften the profile to make the arch shape you require. Easy to operate, high working efficiency and reliable performance.  Power: input voltage 220 Volt 60 Hz.  Input power: 12 KW.  Arc radius 500mm to 1800mm.  Heating temp 90 to 130.

    Lease for $340

    Ask about custom snakes for your extrusions: $725.00 per set
  • Sale!
    Designed to take the sharpness off the edges of both sides of a piece of cut glass.  There are 2 high speed emery belts set in a V to do both edges in one pass.  Perfect machine to polish insulated glass before it is assembled and also tempered glass.  Power: 220 Volts 60 Hz.  Maximum glass size is 63" x  85".  Belt size: 82" x 3.5".

    Leasing available

  • Four wheel base.  Battery powered suction system.  Raises and lowers about seven feet.  Four cup system.

    Lease Available

  • Automatic Insulated Glass Lines

    $59,978.00$99,540.00
    Great for Dura Seal units and metal spacer units.  Reduce labor costs.  Compatible with double or triple pane insulated glass units.  Double glass machine and dryer unit with highly automated level fully controlled by PLC System.  Touch free interface.  Automatically distinguish the film of LOW-E glass and Coated glass.  Glass washing and drying section made of 304# stainless steel, has 6 brushes, Stainless steel and tempered door for easy inspection of washer operation.  Heating system for water and also dryer air.  External marrying system are 2 wheels and controlled by Airtac cylinder so they can push the pieces of glass tightly together. Machines for smaller size units available on request.
  • PLC automatic control, feeding positioning, bending and cutting are all completed at one time.  Automated feeding system, automated cutting system, automatic aluminum spacer bar corner.  Capable of making shapes like square, rectangle, circle, trapezoidal, arch, polygonal, etc. Everything is done on touch screen except start and stop.  Processing speed adjusts automatically based on the size. Easy to operate and program.  Power: 220 Volt 3 phase.  Minimum size: 11" X  11".  Maximum size: 80" X 80".  Spacer bar size: 1/4" to 1".
  • PLC automatic control, feeding, positioning, bending, and cutting are all completed at one time. Auto feeding system.  Auto cutting system. Automatic aluminum spacer bar corner. Able to make many shapes like square, rectangle, circle, trapezoidal , arch, polygonal, etc. Everything is done on the touch screen except start and stop.  Processing speed adjusts automatically based on the size.  Easy to operate and program.  Power:220 Volt  3 phase.  Min size: 11" X  11".  Max Size: 80" X 80".  Spacer bar size from 1/4" to 1".

    Leasing Available

  • Fills many aluminum spacer bars at same time.  Priced right for a small  to medium operation.
  • CNC Automatic Glass Cutting System

    $63,250.00$78,200.00
    2060 Automatic Glass cutting and loading system.  Highly integrated system which improves productivity and reduces labor and material costs.  Very automated and Intelligent us inf CNC system.  Air float to take glass in and out of cutter.  Simple to use and elegant design reduces simplified operation and management.  Low maintenance costs.  Maximum cutting size: 80" x 100".  Minimum cutting size is 4" x 4".  Cuts glass 142" x 96". Model 3624 is a larger version of this system

    Model 2620 lease for $1340

    Model 3624 lease for $1640